Payment & Shipping Terms:
|Product Name:||Round Led High Bay||LED Type:||SMD3030|
|Driver:||Done / Sosen / Meanwell||Power:||200w|
|Lumen Efficiency:||100-120lm/w||Beam Angle:||60 Degree Or 120 Degree|
|Application:||Factory, Warehouse,garage||Input Voltage:||AC85-265V|
Round led high bay light factory lighting 200w 100 lm efficiency ac85-265v 60 degree CE
Qualified quality extruded aluminum heat sink, high efficiency heat dissipation
High lumen efficiency SMD3030 solution, lumen efficiency upto 100lm/w, high CRI
Temperature of LED pin less than 65 degree
Strength stainless stell screw and install ring, prevent rust and corrosion
Use famous brand external isolated driver, long lifetime, power efficiency more than 87%, power factory more than 0.95. Over load protection, over current protection, over voltage protection design.
Beam angle: 60º/120º
Waterproof rubber ring sealing technology, IP54 design
Widely application for factory, warehouse ,toll station, supermarket, stadium, etc.
|Rated Input Voltage||85-265VAC 50/60Hz|
|Dimmable or not||non-dimmable|
|Source of LED Device||SMD3030 200pcs|
|Housing Material||Extruded Aluminum heat sink, rotary Al uminum cover|
Our factory found in 1999, and we have more than 19 years experience in LED area.
Now we just concentrate on high power led lighting only, have more than 10 experiences engineer and they have worked more than 5 years in our company.
We have got ISO9001, ISO14001, OHSAS18001 for many years. Quality system control is good.
We cooperated with many international brand in past ten years.
We have complete quality control and supply chain management system, and have passed ISO9001, ISO14001 and OHSA18001. We are qualified supplier of , GE, Auchan, Carrifour.
From product development to product approval, from material procurement to production control, from outgoing quality control to after-sales service, each work is under the ISO9001 quality management system and each work process is managed by experienced quality control person.
1. Please read install manual carefully before using this product.
2. Please cut down the power before the installation, maintenance or repairing, and a qualified electrician must be required.
3. Please pay attention to live wire, earth wire and neutral wire before installation, and fix the wires according to marks.
4. Do not touch the lamp body during operation, in order to avoid the heat from lamp body leading to security risks.
5. Lamps do not allowed to be covered by insulation or similar material.
6. Lamps cannot be used in dimming applications.
7. Do not install lamps on the surfaces which is easy to get loose, cracked or other unstable ones.
8. If the product is found to work non-properly (such as extinguishing, flashing) , please check whether the product connects with the socket well, or the operating voltage meets the requirement. Please exchange products when above problems are not found.
9. The product is for indoor using only and forbidden to use in high-temperature environments such as bathroom.